EPODEX – ECO resin

The ECO resin A-component must be mixed with the ECO hardener B-component before use. The ECO resin, consisting of the resin and hardener, is suitable for a wide range of applications such as civil, electrical and mechanical egineering. It is a classic coating, laminating and repairing epoxy resin. It can be used as casting resin in layers up to 1cm thick. Coat your floors, table tops and other objects. Our EPODEX ECO system is miscible with all our colour pimgents.

Instructions for use

1. Always start with an epoxy resin primer to avoid high material loss and blistering (layer thickness: 0,2-0,5mm). To do so, simply use a portion of the same clear epoxy resin (to prime floors and other coloured substrates we recommend to use our water-based epoxy resin SEALER & PRIMER system).
2. Mix the ECO resin A-component with the ECO hardener B-component in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
3. Stir through the edge and bottom of the mixing cup as material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
4. Pour the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product can start to boil in the mixing cup.
5. Paint the epoxy primer with a paint roller or brush on the desired surface. We recommend rollers made of polyamide.
6. Let the primer cure for about 20h.
7. Continue with the main coating in the same way. We recommend a maximum casting height of 1cm per layer. Casting above 1cm can lead to overheating, yellowing, cracking and deformation of the material. To acchieve a total thickness of more than 1cm, we recommand casting the next 1cm layer after about 6 hours.
8. If you select a colour on this product page, you will receive dyes or colour pigments in addition to the resin and hardener.
9. To colour the main coating, mix the supplied colour with the resin A-component or with resin-hardener mixture. Adjust the colour intensity individually by adding more or less colour pigments.
10. The epoxy resin can be touched and is accessible by foot after 20 hours and is chemically fully cured after about 7 days.
11. You can find more detailed information in our information table under the “Learn more” button on this product page.

Consumption volumes

Determine the required amount of resin neened with the help of our epoxy resin “Epoxy calculator” on this product page.

Recommended thicknesses when coating floors and other surfaces

• Overall coating (primer + main coating): approx. 1,65-2,20kg/sqm for layer thicknesses of 1,5-2mm
• Primer: approx. 0,22-0,55kg/sqm for layer thickness of 0,2-0,5mm
• Main layer: approx. 1,10-1,65kg/sqm for layer thicknesses of 1-1,5mm

Recommanded amount of colouring agent per kg of resin+hardener:

• Powder pigments(Metallic, Neon und Glow in the dark): 1,5-2% (15-20g),
• Transparent dyes (except turquoise): 60 drops (1,8g),
• Transparent turquoise: 40 drops of blue und 20 Tropfen drops of yellow dye (1,8g),
• Semi-transparent dyes (except turquoise): 40 drops of the desired colour und 20 drops of white dye (1,8g),
• Semi-transparent turquoise: 40 drops of blue, 20 drops of yellow and 40 drops of white dye (3,0g)

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed. All information is recommendations based on our experience; without legal obligation.

Ingredients

A-component Attention: 2,2 ‚- [(1-methylethylidene) bis (4,1-phenyleneoxymethylene)] bisoxirane Reaction mass of 2,2‘ – [methylenebis (4,1-phenyleneoxymethylene)] dioxirane and [ 2 – ({2- [4- (oxirane-2-ylmethoxy) benzyl] phenoxy} methyl) oxiranes and [2,2 ‚- [methylene bis (2,1-phenyleneoxymethylene)] dioxirane oxiranes, mono (C 12-14 alkyloxy) methyl) derivs.

Danger statements

A-componentDanger Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Toxic to aquatic life with long lasting effects. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents and container in accordance with all local, regional, national or international regulations.